Total width – 250 mm.
Expansion joint width – 50 mm.
Displacements of the deformation unit are permissible displacements and vibrations of the elements of the structure that are conjugated.
Displacements include transverse or longitudinal shear, compression and tension.
Packaging |
Quantity |
|---|---|
|
Roll |
50 m. |
Purpose and features, for the DR-250/50 in EPDM are:
- Compression – 35 mm;
- Tensile – 60 mm;
- Transverse shear – 70 mm;
- Longitudinal shear – 55 mm;
- Water pressure – 0,29 MPa.
Waterstop Aquastop are used in civil and commercial construction.
Guaranteed storage period – 2 years.
Warranty period of operation – 5 years if the installation technology is observed.
Installation diagram Waterstop Aquastop DR
Metal profiles with anti-corrosion coating should be used for fastening of keyways. The anchor spacing is 90 ÷ 180 mm.
Tapes of uncured butyl rubber sealant of sufficient width and thickness not less than 3 mm should be placed between the concrete and waterproofing waterstop along the banks of the joint, as shown below
